RouseCIPE Expand Size Load #1 Load #2 Separate Massage "D" "L" "2" "0"  
"2" Instructions




As you load balloons, the RMS framework that starts out as a pretty wierd shape  will automatically bend around to make the  "2" in the logo.

The upper right side of the "2" has a pair of openings that stick out from the normal shape of the "2".  These opening should be used to overlap two balloons near the upper left of the "0".  This will hold the "20" together and set the angle of tilt between them to closely match the official logo.

The project will go more quickly and easily if you properly match these two surfaces..


Contact Rouse International at:   info@RouseInternational.com          Return to Top


RouseCIPE  for DL20 Logo
Last Updated: 28-March-2005
WebMaster: graham@RouseInternational.com
copyright 2005 Rouse International