....
Catalogs Custom Shop Distributors Downloads Galleries RouseAbout
RMS
Users Group  
 

Rouse Matrix Systems    
Rouse Home EXPANDABLE FRAMEWORKS   --   MAKING  BALLOON  ARTS  •  EASY  •  FUN  •  EFFECTIVE  •  ECONOMICAL

.

    ....  
    .
     
 
 
 BACK (9) Load Pairs of Balloons NEXT 

To load balloon pairs into a Rouse Matrix Banner

*     Hold the balloons apart with the fingers of one hand as shown in the animation to the left.

*     Use the other hand to hold the Matrix near an appropriate Spiral Anchor with the opening turned up.  

*     Slide the necks of the balloons down, then around and up the spiral path of the anchor, then release the balloons.

*     Use one hand to hold the Matrix strap and the other hand to roll one balloon into place.  (That place is centered in the opening with 1/2 of the balloon above and 1/2 below the Matrix.)

*     Repeat the last step with the second balloon of the pair, then repeat the whole process with other pairs to fill the entire Matrix.

Return to Top

 

Last Updated: 11-July-2002
WebMaster:
graham@rouseinternational.com
copyright 2002 Rouse International
URL:
http://www.rouseinternational.com/abtrms/cl.bt.09.htm