TopTop
ROUSE INTERNATIONAL  -->   ABOUT RMS  -->   CLOSER LOOK  -->
 BACK (2) Align Panels NEXT 
To connect two RMS-2 Banners,

*     With spirals matched, place one panel above/below or to the left/right the other.  Make sure the outside edges of each set of panels are aligned.

Left and right edges should line up when one panel is above the other

With panels placed one above the other the connector tabs appear to be staggered.

       

Top and bottom edges should line up when one panel is beside the other.  Connector tabs should line up evenly in the middle.

.

 

Last Updated: 22-July-2002
WebMaster:
graham@rouseinternational.com
copyright 2002 Rouse International
URL:
http://www.rouseinternational.com/abtrms/cl.template.00.htm